Get listed
Home > Blog > How UK Contract Manufacturers Price Work: Setup, Tooling, Per-Unit Price and Minimums

How UK Contract Manufacturers Price Work: Setup, Tooling, Per-Unit Price and Minimums

Buyer Guides · 4 November 2026

Two quotes for the same part can differ widely, and the cheaper one is not always the lower cost. Most quotes are built from the same few lines. Knowing them lets you compare like with like.

1. Setup and tooling (one-off costs)

Programming, fixtures, moulds, stencils and test fixtures are paid for once and sometimes spread across the unit price. Ask which: a low unit price can hide a large upfront charge, and a higher unit price may include setup you would otherwise pay separately.

2. Materials and components

In electronics, a turnkey order means the manufacturer buys the components, a consignment order means you supply them, and many orders are a mix. Machining and fabrication quotes usually include the material. Ask who buys what, what handling or margin is added, and how component shortages are handled.

3. The per-unit price and volume breaks

The price per part usually falls as quantity rises, because setup is shared across more parts. Ask for prices at three quantities, for example your first order, a typical repeat and a larger run, so you can see where the breaks sit.

4. Minimum order quantity and minimum charge

Many suppliers set a minimum quantity or a minimum order value. Check it before you compare prices, since a small order may cost more per part than the quote implies.

5. Inspection, certificates and special processes

First-article reports, material certificates, certificates of conformity, plating, anodising, heat treatment and testing may or may not be in the price. If you need them, make sure each quote includes them.

6. Packaging and delivery

Ask whether delivery is included and what delivery terms apply. Incoterms such as EXW and DAP describe who pays for and carries the risk of transport at each stage.

7. Payment terms, validity and change charges

Check how long the quote is valid, what the payment terms are and what a change to the design or quantity costs after you order.

What moves the price

Tight tolerances, hard-to-work materials, complex geometry, short lead times and certification requirements all add cost. If you can relax one without hurting the product, you may save more than by negotiating the unit price.

How to compare quotes fairly

  1. Send every supplier the same package: drawings or models, revision, quantity, material, finish, inspection requirements and delivery date.
  2. Ask each to quote at the same quantities.
  3. Put the quotes in one list by line: setup, materials, unit price, minimums, inspection, delivery, terms.
  4. Ask about any line that is missing rather than assuming it is included.

Where to find suppliers to quote

Use the directory for your kind of work to shortlist several and send one enquiry to all of them: EMS Directory, PCB Directory, CNC Directory, 3DP Directory, ESS Directory or EMC Directory. For what to ask beyond price, read how to choose a UK contract manufacturer.

For press enquiries about Contract Manufacturing UK, contact cmuk@contractmanufacturing.co.uk.